Will fit Glock 19gen5 pistols with or without threaded barrel and even with most aftermarket barrels
The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide.
COMPENSATOR MAIN BODY:
-WEIGHT: 3.2 oz
-WEIGHT w/ PACKAGE: 6.7 oz
-x1 Comp main body
-x1 Recoil spring
-x1 Guide rod
-x1 Guide rod fitment washer
-x1 Guide rod head
-x1 Internal spring
-x1 Warning card
-No threaded barrel needed (but can be used)
-Eliminates the need for threaded barrels. 50 State Legal
-Widened bore to reduce baffle strikes and keyholing rounds
-2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide
-No permanent modification of weapon required
-Blended, no snag profile
-Matches with width of the slide, it can be used with open holsters, no special holster needed
-Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil
-Contours with slide dimensions to be compatible with most open-bottom holsters
-Precision CNC machined
Threaded Barrels: We recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. We've tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies.
-Designed for and tested on OEM GLOCK™ factory and Strike Industries slides
-SI cannot guarantee proper fitment and application on third party slides and frames
-Recommended torque value for guide rod nut is 25 lbs/in.
-Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure
-Loctite® Threadlocker Blue 242® on all threads
-Gunsmith or armorer installation recommended
-Product tested with factory GLOCK™ components
-Performance may vary when using third party compatible GLOCK™ components
-Consult with a local gunsmith for any custom modification while use with this product
-For GLOCK™ GEN5 G19 (compact) SLIDES
-Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators
-This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
--“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.