EGW CZ 75 Red Dot Mount Vortex Venom

EGW CZ 75 Red Dot Mount Vortex Venom
Vortex Viper / Venom CZ 75, 75 SP-01 Phantom, 85, 97, P01, and PCR Sight Mount (fits Burris FastFire and Docter)

85,00 85,00 U bespaart: 0%
  9  In voorraad
Artikelnr: EGW49326

Red Dot Fitment:
Vortex Viper
Vortex Venom
Burris Fast Fire
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Sightmark Core Shot

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

Mounting Hardware is Included

Mounting Hardware:
(2) 6-32 Button Head Screws
(2) 6-32 Flat Head Screws
(1) 6-32 Set Screw

This mount fits:
CZ 75
CZ 75 SP-01
CZ 75 SP-01 Phantom
CZ 75 SP-01 Shadow*
CZ 85
CZ 97B
CZ 97D
CZ P-01
CZ PCR (there will be a gap under the front of the adapter plate)
Tristar P120

This mount does not fit:
CZ P-07
CZ P-09

*We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Torque Specs: 15 in/lbs

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

EGW CZ 75 Red Dot Mount Vortex Venom heeft nog geen reviews. Deel uw product ervaring en plaats een review.
EGW CZ 75 Red Dot Mount Vortex Venom